Modular Crystal Chandelier Expandable Arm Restaurant Ceiling Fixture System Supply

A modular crystal chandelier is the practical answer for a restaurant operator who does not yet know how big the room will end up. Arms mount to a hub on keyed slots, so a six arm fixture can grow to twelve or eighteen arms when a dining room expands or a partition is removed, using the same hub, the same crystal and the same visual language. Each arm terminates in a plug, so no wiring is pulled through tubes on site, and the crystal is supplied in trays matched to arm positions so an expansion later adds matching drops rather than a shade off. In practice this saves a restaurant from replacing a fixture when it takes over the neighbouring unit, and it saves a designer from specifying a large fixture that looks thin in a half built room.

• Keyed Expandable Hub: Arms mount on keyed slots, so a six arm fixture grows to twelve or eighteen arms when a dining room expands, using the same hub and crystal
• Plug In Arm Wiring: Each arm terminates in a plug at the hub, so no conductor is pulled through a tube on site and additions need no electrician with specialist tooling
• Matched Crystal Trays: Crystal is supplied in trays matched to arm positions, so an expansion months later adds drops from the same cut and colour grade
• Kit Format Supply: The fixture arrives as a documented kit with hub, arms, drops and hardware, which keeps small contractors from improvising during fit out
• Expansion Without Replacement: A restaurant taking over an adjoining unit can enlarge the fixture rather than replacing it, which is where most of the commercial value sits
• Consistent Arm Geometry: Arm length and angle are fixed by the hub, so expansions keep the original silhouette instead of drifting into a different shape

Suited to restaurants planning staged expansion, venues converting adjoining units, and hotel dining rooms where the final table count is not settled at fit out. The kit format also suits contractors buying for several small sites, because one hub specification covers a range of room sizes and the arms can be ordered in the quantity each site needs.

We confirm the planned maximum arm count and room dimensions, then supply a kit sized for the final configuration with the option to add arms later. Options include a locking hub for high ceiling installations, arm length variation within one fixture, crystal density differences between inner and outer arms, and a staged supply plan matched to expansion dates.

The kit ships with the hub in a foam lined crate, arms individually sleeved and blocked, and crystal in trays labelled by arm position. Hardware and plugs travel in a labelled box with the assembly card, which shows arm numbering so an expansion follows the original layout rather than a new arrangement.

Lead time is 20 to 28 days for a kit, with additional arms produced in 12 to 18 days so expansions are not delayed. Spare arms and drops are stocked for three years, the hub specification is retained for five years, and installation support by video call covers hub alignment and arm fitting.