Luxury Decorative Lighting Chandelier Restaurant Private Dining Fixture Series Supply

Private dining rooms have a lighting problem that open dining does not: the fixture must be impressive enough to justify the room rate, but the ceiling is usually domestic height and the table is directly beneath it. This luxury decorative lighting chandelier is scaled for that constraint, using a wide shallow profile that spreads sparkle across the table rather than hanging into the sight line. Crystal is dressed on the outer ring so guests see the fixture while seated, and the lamp output is deliberately modest with a five percent dimming floor, because a private room is used for conversation rather than display. The series covers three diameters so a restaurant with several private rooms can specify the same design at different scales, and each unit ships with a floor plan position so the room is lit consistently across the group.

• Wide Shallow Profile: A broad profile with a shallow depth spreads sparkle across a private dining table without hanging into the sight line above a domestic height ceiling
• Outer Ring Crystal Dressing: Crystal is dressed on the outer ring so seated guests see the fixture at eye level rather than looking up at an underside
• Modest Output With Deep Dimming: Lamp output is deliberately restrained with a five percent dimming floor, because private rooms are used for conversation rather than display
• Three Scaled Diameters: One design in three diameters lets a restaurant with several private rooms specify the same fixture at scales that suit each room size
• Consistent Room Lighting: Each unit ships with a plan position and drop setting so the same design lifts the room to the same light level across a group of private rooms
• Quiet Suspension: Rubber isolated anchors remove the faint rattle that becomes audible in a small room during a quiet conversation at the table

Specified for restaurant private dining rooms, hotel function suites, wine rooms and members club dining areas. The shallow profile also suits boardrooms and executive dining rooms in corporate hospitality, where the ceiling height is standard but the room needs a luxury reference. Restaurants with several private rooms use the three diameter structure to keep a consistent look while matching the fixture to each room size.

We confirm room dimensions and table size, then recommend diameter and drop with a plan position. Options include champagne crystal for warmer rooms, a two tone brass and black finish, a series schedule with per room pricing, and a version with an integrated downlight for table accent where the room has no separate spot circuit.

Units ship in moulded cartons with crystal in labelled trays and hardware bagged separately. A room position card is included so the installer knows which diameter belongs to which room. Brass carries a protective film until the interior is cleaned, and cartons are sized for service corridor access in a working restaurant.

Lead time is 20 to 28 days, with express production for restaurant openings. A spare allowance of six percent crystal is included, sleeves and drops are stocked for three years, and a dimming compatibility sheet is supplied for the restaurant's existing control system.