Linear LED Pendant Fixture Custom Length Dining Room Bar Counter Lighting Suspension Profile

This linear LED pendant fixture is the specification grade version of a linear profile: fewer decorative details, tighter manufacturing tolerance and a suspension system engineered for long runs. It is intended for designers and contractors who need a straight line of light exactly the length the joinery demands, with no compromise on the driver quality or the dimming curve. Lengths are made to order between one and sixteen metres, with joiner blocks that disappear behind the diffuser so a long run reads as one continuous line even under close inspection. Suspension points are calculated so the profile does not sag between anchors, and the remote driver arrangement keeps the void accessible from an adjacent ceiling hatch rather than directly above the fixture. Standard outputs range from a soft 18 watts per metre for ambience to 45 watts per metre where the line is also the working light.

• Made To Length: Profiles are produced to order between one and sixteen metres, so a line of light matches the joinery exactly instead of being assembled from fixed stock sizes
• Invisible Joiner Blocks: Joiners sit behind the diffuser with a machined alignment key, so a long run reads as one continuous line even when inspected from directly below
• Calculated Suspension Spacing: Anchor positions are calculated against profile stiffness and total length, preventing the sag that appears mid run when spacing is chosen by eye
• Accessible Remote Drivers: Drivers are located so they can be reached from an adjacent ceiling hatch rather than directly above the fixture, which is the usual maintenance failure point
• Output Per Metre Choice: Standard outputs run from 18 watts per metre for ambience to 45 watts per metre where the same line provides working light for a counter or table
• Tight Dimming Curve: Drivers hold a smooth curve from five percent upward with no step at the bottom, so the fixture behaves predictably on a restaurant scene controller

Specified for dining rooms, bar counters, kitchen islands and hotel restaurant runs where the line of light must follow the joinery. The specification grade construction also suits retail counters, reception desks and meeting room tables, where a visible sag or an inconsistent dimming curve becomes an obvious defect. Designers working across a hotel or restaurant group use the same profile at different outputs and lengths, keeping ceiling language consistent from reception through to private dining.

We work from joinery drawings and ceiling plans, then issue a layout drawing with profile lengths, joiner positions, suspension anchors and driver locations. Options include radius sections for curved bars, a two circuit profile for a separate accent channel, RAL matched finishes, integrated emergency modules, and a DMX interface where scene control is required.

Profiles ship in rigid tubes with end caps, with joiners, diffusers and drivers packed separately and clearly labelled. A layout drawing and driver location plan travel inside the first tube. Long runs are broken at the planned joiner positions, and each tube is marked with the section reference so the installer can work from the plan rather than measuring on site.

Lead time is 20 to 28 days, with express production for fit out deadlines. Profile, diffuser and driver spares are supplied at two percent, drivers are stocked for five years, and a commissioning guide covers dimming curves and control pairing. Radius and corner sections are quoted per drawing, and replacement lengths can be produced individually later.