Restaurant Linear Pendant Light Custom LED Fixture Dining Space Ceiling Bar Lighting

Linear pendant lighting is what most restaurants actually need, because the tables are linear and the sight lines matter more than the fixture. This restaurant linear pendant light is a custom LED fixture: the profile is built to the counter or table run length rather than in fixed sizes, so a sixteen metre banquette gets one continuous line instead of four units with gaps at the joints. The optical design keeps glare low with a deep recessed diffuser and a UGR rating below nineteen, so a guest seated under the fixture is not looking into a bright source, and food on the table reads correctly at 2700K with CRI above 90. The profile is only 45mm wide, which keeps the ceiling visually quiet in a low room, and the driver is remote so the fixture has no visible power box.

• Continuous Custom Length: The profile is built to the actual table or counter run, so a long banquette gets one continuous line instead of several units with visible gaps at the joints
• Low Glare UGR Under 19: A deeply recessed diffuser holds unified glare rating below nineteen, so guests seated under the fixture do not stare into a bright source through a meal
• Slim 45mm Profile: A 45mm wide profile keeps the ceiling visually quiet in rooms where the fixture hangs close to head height above a bar or banquette
• Remote Driver Design: The driver sits in the ceiling void, leaving the visible profile free of power boxes and simplifying replacement without touching the fixture
• Warm High CRI Output: 2700K with CRI above 90 keeps plated food, wine and timber finishes accurate, which matters for restaurants photographing their menu and room
• Grease Resistant Extrusion: The aluminium extrusion carries a baked finish that resists cooking grease, so the profile does not dull or become tacky above a working dining room

Built for restaurant dining rooms, bar counters, banquette runs and hotel breakfast areas where the light must follow the seating line. The continuous profile also suits open kitchens, where a single line of light above the pass gives the chef an even working plane without multiple fittings to clean. Cafes and wine bars specify shorter lengths with brushed brass or bronze finishes, and hotel restaurants use the same profile in a suspended version over long communal tables.

Send the floor plan with table and counter positions, and we produce a layout drawing with profile lengths, suspension points and driver locations. Options include a suspended or surface mounted version, a two circuit profile with a separate accent channel, a brass or bronze finish, corner and radius sections for curved bars, and a dimming module matched to the existing control system.

Profiles ship in rigid tubes with end caps, joiner blocks and diffusers wrapped separately. Drivers travel in a labelled box with wiring diagrams and a driver location drawing. Long lengths are broken at planned joiner positions that match the layout drawing, and the joiners are designed to be invisible once the diffuser is fitted.

Lead time is 18 to 26 days for standard finishes, with express production for restaurant openings. Profile and diffuser spares are supplied at two percent, drivers are stocked for five years, and commissioning notes cover dimming curve and driver location. Technical support is available during installation for long continuous runs and radius sections.