Modern Ring LED Chandelier Sculptural Acrylic Pendant 3000K Dimmable Designer Living Room Fixture

This modern ring LED chandelier uses cast acrylic rather than glass or metal for the ring body, which brings two practical advantages into luxury interiors: weight and diffusion. A 1000mm ring weighs under four kilograms, so it can hang from standard plasterboard with a single anchor, and the acrylic edge glows softly along its full circumference while the face remains matte. Three concentric rings are suspended at graduated heights, producing a layered halo effect that suits double height living rooms and mezzanine voids. The dimmable driver covers five to one hundred percent output with no visible flicker at low levels, which is important when the fixture is used as evening ambience rather than task lighting. Assembly on site takes about forty minutes with the supplied quick connectors.

• Cast Acrylic Ring Body: Optical grade cast acrylic rings weigh under four kilograms at 1000mm, allowing plasterboard mounting with a single anchor and no structural reinforcement
• Edge Lit Halo Effect: LED modules fire into the acrylic edge so the entire circumference glows evenly, while the matte face stays soft and glare free in photographs
• Layered Concentric Design: Three rings at graduated heights create depth in double height living rooms and mezzanine voids, reading as a single composition from the sofa below
• Flicker Free Dimming: Five to one hundred percent dimming with flicker free driver, tested against camera recording so video shoots and hospitality photography stay clean
• Quick Connector Assembly: Push fit connectors and pre terminated cables cut site assembly to around forty minutes, with no specialist tools and no loose wire joints
• Neutral Colour Rendering: 3000K output with CRI above 85 keeps timber veneers, leather and fabric upholstery close to their specified appearance under evening light

Suited to designer living rooms, duplex apartments, hotel suites and show flats where the ceiling cannot carry heavy loads but a sculptural centrepiece is still required. The layered rings work above low sofas and coffee tables, and the flicker free dimming makes the fixture practical for interior photography and video walkthroughs used in property marketing. Smaller diameter combinations are commonly specified for dining areas, stairwell voids and boutique reception lounges, giving a consistent visual family across a whole apartment or hotel floor.

Ring sizes are chosen from three stocked diameters and combined into any arrangement from two to four rings. Custom requests include a single large 1200mm ring for stairwell voids, a two tone finish with a smoke outer ring, and a remote driver version for ceilings with limited void depth. We issue a composition drawing showing cable lengths against your ceiling height, and can supply a mock up frame if the client wants to test scale before ordering.

Acrylic rings travel in moulded foam cradles inside double wall cartons, with each ring in its own compartment to prevent edge contact. Cables, canopy and driver are packed in a labelled accessory box. A printed assembly card with photographs is included, and every carton is drop tested to a one metre standard before the order is released for shipping.

Lead time is 15 to 22 days for standard configurations and 25 days for custom combinations. We ship samples within five working days, hold replacement acrylic rings in stock for two years, and provide a dimming compatibility list covering common European and North American wall dimmers. Remote technical support is available during first installation if the ceiling void needs adjustment.