Installation Instructions for Custom Glass Chandeliers

1. Preparation

• Ensure that the ceiling structure is strong enough to support the total weight of the chandelier.

• Turn off the power at the main electrical panel before installation.

• Carefully unpack all glass components and place them on a soft surface to avoid scratches or breakage.

2. Mounting the Ceiling Plate

• Secure the mounting bracket/ceiling plate to the junction box using the provided screws.

• Check that the plate is firmly fixed and level.

• If Without ceiling plate, we can use 1:1 drawing to the ceiling at first, then install the hanging glass one by one.

3. Electrical Wiring

• Connect the live (L), neutral (N), and ground (G) wires according to local electrical standards.

• Ensure that all wire connectors are tightened and properly insulated.

• If the chandelier includes a dimmable driver, make sure the wall switch is compatible.

4. Installing the Main Frame

• Lift the main metal frame and attach it to the ceiling plate using the safety hooks or mounting screws supplied.

• Double-check that all structural parts are securely fastened.

5. Hanging the Glass Components

• Install glass shades, pendants, or tubes one by one following the numbered diagram.

• Handle glass parts with clean gloves to prevent fingerprints or damage.

• Ensure each glass piece is properly locked or clipped into its designated holder.

6. Final Check

• After all components are installed, inspect the chandelier from different angles to ensure symmetry and alignment.

• Restore power and test the lighting.

• Adjust the height or balance if necessary.

7. Maintenance Tips

• Clean the glass parts regularly using a soft cloth and non-abrasive cleaner.

• Avoid spraying cleaning solutions directly onto electrical components.

• Periodically check that screws and hanging parts remain tight.